Italiano
Deutsch
English
FrançaisISO 6020/2 hydraulic cylinders with tie-rods
Tie rods hydraulic cylinder in compliance with ISO 6020/2 standard, also suitable for use with magnetic sensor.
Available in all mountings defined by the standard, with multiple seal configuration.
All cylinders are tested before delivery in accordance with ISO 10100 standard.
| Standard | ISO 6020/2 - DIN 24554 |
| BORES | CD: 25 - 32 - 40 - 50 - 63 - 80 - 100 mm |
| DK: 125 - 160 - 200 mm | |
| MD: 25 - 32 - 40 - 50 - 63 - 80 - 100 - 125 mm | |
| OPERATING PRESSURE | Operating: 160 bar Test: 240 bar |
| THREADED HOLES | Front ISO MX5 Rear ISO MX6 |
| FLANGE | Front ISO ME5 Rear ISO ME6 |
| FEET | Front and rear ISO MS2 |
| CLEVIS | Ball jointed eye ISO MP5 Male clevis ISO MP3 Female clevis ISO MP1 |
| TRUNNIONS | Front ISO MT1 Intermediate ISO MT4 Rear ISO MT2 |
| EXTENDED TIE-RODS | Front and rear ISO MX1 Front ISO MX3 Rear ISO MX2 |
| HIGH SEALING | Max. speed: 0.5 m/s Temperature: -20 / +80 °C Fluid: hydraulic oil |
| LOW FRICTION | Max. speed: 1 m/s Temperature: -20 / +80 °C Fluid: hydraulic oil |
| VITON | Max. speed: 1 m/s Temperature: -20 / +150 °C Fluid: hydraulic oil / Phosphoric esters |
| HFC-FLUID | Max. speed: 1 m/s Temperature: -20 / +80 °C Fluid: HFC-fluid |
| Rod material | Chrome-plated CK45 steel Hard chrome-plated stainless steel Hardened and tempered chrome-plated steel Nikrom steel Hardened chrome-plated steel |
| Rod end | Male thread Female thread Floating joint |
| Proximity switches | Front and/or rear with protection |
| Magnetic switches | Reed PNP magnetoresistive IO-LINK special sensors |
| CETOP PLATE | ISO 4401-03 NG6 ISO 4401-05 NG10 |
| Bushing drain | On demande |
Features and applications
Thanks to their high-strength steel tie-rod construction, these cylinders ensure compact dimensions, mechanical strength and long service life even in demanding working conditions, with nominal pressures up to 160 bar and test pressure at 240 bar, in accordance with ISO 10100 standard.The bronze rod guide bushing reduces friction during rod movement and, thanks to its properties, protects the surface from scratches, thus preserving the sealing capacity of the seals and preventing the occurrence of leaks.
The presence of adjustable hardened steel end-of-stroke cushioning ensures correct load deceleration at the end of the stroke, with a long service life.
They are available with nickel-plating treatment and chrome-plated stainless-steel rod to ensure protection against corrosion in aggressive environments, when exposed to atmospheric agents or salt spray, or in applications where washing with corrosive substances is required.
Frequently Asked Questions
- What does it mean that hydraulic cylinders comply with ISO 6020/2 standard?
- What is the operating pressure of tie-rod hydraulic cylinders?
- In case of urgency, what are the production times for a custom ISO 6020/2 hydraulic cylinder?
- What is the purpose of adjustable end-of-stroke cushioning?
- In which applications are ISO 6020/2 tie-rod hydraulic cylinders used?
- Can tie-rod hydraulic cylinders be equipped with magnetic sensors?
- Which seals are available?
- Is every hydraulic cylinder tested before delivery?
- Why do Conforti hydraulic cylinders have a bronze rod guide bushing?
What does it mean that hydraulic cylinders comply with ISO 6020/2 standard?
ISO 6020/2 standard defines dimensions, mountings and construction criteria for tie-rod hydraulic cylinders with a nominal pressure of 160 bar. This ensures interchangeability and compliance with international standards.
What is the operating pressure of tie-rod hydraulic cylinders?
ISO 6020/2 tie-rod hydraulic cylinders operate with a nominal pressure of 160 bar and are tested at 240 bar in accordance with ISO 10100 standard, ensuring maximum strength and safety during operation.
In case of urgency, what are the production times for a custom ISO 6020/2 hydraulic cylinder?
Our production organisation allows us to prepare your custom ISO 6020/2 hydraulic cylinder in extremely short times, up to 48 hours in case of emergencies.
What is the purpose of adjustable end-of-stroke cushioning?
CD - DK - MD hydraulic cylinders can be equipped with end-of-stroke cushioning fitted with a quick restart system. The cushioning prevents mechanical shocks at the end of the stroke and is adjustable to suit specific requirements and the loads to be decelerated.
In which applications are ISO 6020/2 tie-rod hydraulic cylinders used?
They are employed in industrial plants and machinery that require precise and powerful linear movements combined with high reliability, such as sheet metal processing lines, lifting and handling equipment, automation lines and special equipment.
Can tie-rod hydraulic cylinders be equipped with magnetic sensors?
Yes, MD cylinders are designed for use with Reed or special magnetic sensors, which allow accurate monitoring of the piston position and complete control of work cycles.
Which seals are available?
You can choose from various high-performance seal configurations: high sealing, low friction, for high temperatures and for special fluids. Metal wipers are also available, which are even more effective at removing debris from the rod when operating in dirty environments.
Is every hydraulic cylinder tested before delivery?
Yes. All Conforti tie-rod cylinders undergo functional testing at 240 bar in accordance with ISO 10100 standard, ensuring reliability, safety and consistent performance.
Why do Conforti hydraulic cylinders have a bronze rod guide bushing?
All our hydraulic cylinders feature a bronze rod guide bushing. This material reduces friction during rod movement and, thanks to its properties, protects the surface from scratches, thus preserving the sealing capacity of the seals and preventing the occurrence of leaks.